Uretheral Setent Kit Hydrophile Beschichtung

Modell Nr.
US-5-260
Zertifikat
ce, ISO13485
Anderer Name
Doppel-j-Stent-Katheter
moq
500pcs
Verwendung
urologie interventionelle Verfahren
Name
Harnleiter-Stent einfach
Transportpaket
Tyvek Pouch+Inner Box+Outer Box
Spezifikation
4/4.5/5/6/7/8Fr * 22-28cm
Warenzeichen
MicroApproach
Herkunft
China
Referenzpreis
$ 3.60 - 10.80
kontaktieren Sie uns

Produktbeschreibung

Uretheral Setent Kit Hydrophilic Coated
Used for temporary internal drainage from the ureteropelvic junction to the bladder to protect the uretheral tract. X-ray - proof polyurethane Ureteral Stent  have been employed to relieve obstruction in a variety of benign, malignant, and post-traumatic conditions. These stents may be placed using endoscopic, percutaneous, or open surgical techniques.

Each end of the ureteral stent consists of a curled, tapered pigtail. Drainge holes are placed on each stent, including on the pigtail of the stent.The ureteral stent is made of X-ray - proof polyurethane.There are two types of guide wire to be compatible with, guide wire hydrophilic coating and zebra guide wire.

Uretheral Setent Kit Hydrophilic Coated

Uretheral Setent Kit Hydrophilic Coated
1. Variable length designed to accommodate various ureteral lengths.

2. The Hydrophilic Coating increases the lubricity of stent.

3. Biocompatible material designed for up to a 30-day indwelling time.

Uretheral Setent Kit Hydrophilic Coated
Instruction for Use

1. Using a baseline pyelogram, estimate the proper stent length; add 1 cm to that estimated ureteral measurement. Accurate measurement enhances drianage eddiciency and patient comfort.
2. Take out the product from the Tyvek pouch and make sure the product is in good condition.
3.1 Guide wire hydrophilic coating: Inject saline solution into the guide wire sheath, fully moisten the hydrophilic coating of guide wire, and remove the guide wire from the sheath after confirming the soft surface of the guide wire product is lubricated.
3.2 Zebra guide wire: It is recommended to flush the zebra guide wire with normal saline as well. 
3.3 Meanwhile, the ureteral stent was soaked with saline solution.
4. When the ureteral stent is placed retroactively by cystoscope, the guide wire is carefully inserted into the ureteral stent and push catheter. After the ureteral stent is fully unfolded, the ureteral stent is clamped with the guide wire, and the ureteral stent is pushed through cystoscope to the end of cystoscope instrument.The fixation clip was removed, and the ureteral stent was pushed forward to the patient's renal pelvis. The push catheter was clenched, the guide wire was removed, and the ureteral stent was indwelling in the ureter.If necessary, the endoscopic forceps can be used for fine tuning.
5. The ureteral stent should be operated according to the urological operation standard when other operations or methods are used.
6. The indewlling date of the ureteral stent should be recorded. Cystoscopy or X-ray development should be performed regularly. The ureteral stent should be removed timely by the scheduled date.

Uretheral Setent Kit Hydrophilic Coated   Products' Parameters
Diameter 4Fr/4.5Fr/5Fr/6Fr/7Fr/8Fr
Length 220 mm/240 mm/260 mm/280 mm
A ccept guide wire
 diameter 		4Fr /4.5Fr/5Fr: 0.035 ''
6Fr/7Fr/8Fr: 0.038 ''



Uretheral Setent Kit Hydrophilic Coated

 

Einmalige Medizinische Instrument

JCTK.CO.UK, 2023