Operating status
of the equipment includes: locking, disinfection, negative ion, WiFi, and alarm;
Operating modes
include: manual mode, reservation mode, custom mode, and timing mode;
Air quality
sensors includes: PM2.5, TVOC;
Optional sensors
: carbon dioxide (CO2), formaldehyde (HCHO), ozone;
Fan velocity
: 3 in total. First digit (1, 2 or 3) indicate current fan velocity.
|
Reservation mode switching, activation,
and cancellation
(1) Press the "Mode" button to switch to the
reservation mode, and "Reservation Mode"
will be displayed on the panel
(2) Press the "ON/OFF" button to turn off the
machine. "Reservation Mode" can be seen at
the bottom of the page, indicating reservation
mode has been activated. Then the machine
will be turned on at scheduled time.
(3) Cancel the scheduled mode: turn on the
machine; press the "Mode" button to switch to other modes to cancel it.
|
View time period in reservation mode
Route ONE.
Under the reservation mode, press the "OK" button to enter into reservation page.
Route TWO.
Under any mode, press "Settings" button to enter into the setting page.
Then enter
into "Running Setting", then into "Reservation Mode".
|
Add time period for reservation mode
(1) The default does not have a preset time period, and the user need to add a time period before
using the reservation mode
(2) On the page of time period, select "+
" with the arrow button on the remote control; then press
the "OK" to add the time period. There, the start time, end time, running fan velocity, and disinfection
can be set. After the setting is completed, press the "ESC" to save and return to the parent page.
(3) The default configuration is to start at 8:00 and end at 9:00, fan velocity at "1", and default
disinfection at OFF.
(4) Quick setting: the default end time of each period is automatically 60 minutes after the start time;
default start time is 30 minutes later than the end time of the previous period.
(5) Enhanced disinfection: only used for machines with enhanced disinfection function.
|
Switching to the custom mode
Press the "Mode" button to switch to the custom mode, Custom mode will be displayed. 3 sub
modes, "sleep mode", "speed mode", "automatic mode", are included.
|
Setting of Custom Mode
(1) How to enter custom mode.
In custom mode, press the "OK" to enter into its setting page; press "Settings" in any mode to enter
the setting page, and then press "Run", "Custom Mode" in sequence.
(2) The three sub-modes can be switched in sequence by selecting "Switch Mode" in its setting page,
and the "current mode" icon indicates the selected mode.
(3) Press "left/right" to move the cursor to select the mode to be set, and press the "OK" to enter the
setting.
(4) Running time and fan velocity and be set under "Sleep" and "Speed" sub-modes.
(5) "Automatic mode". Running time can be set here and fan velocity will be automatically adjusted
according to the sensor values, and shut down when time run out.
|
(1) Under manual mode, press "Timing" button
to toggle between time durations 30-60-90-120-
150-180 minutes
(2) To cancel the timing mode, you need to
press the "Mode" in the timing mode.
|
Press "Settings" - "Statistic" in sequence
to view the cumulative disinfection time,
disinfection unit monitoring (including the main
filter, disinfection module), and alarm records.
|
In the system settings, you can switch on/off the button sound, adjust the display brightness and reset
the system settings.
Note:
to reset the system will reset the current settings, including mode, system time, reservation
mode, custom mode, display brightness, sound etc.
|